c语言 第一次（C language for the first time）.docVIP

c语言 第一次（C language for the first time） 1、用 for 实现 # includes stdio.h int main () { int i; double s = 1, sum = 0; for (i = 1, the = 30; i + +) {s = s * i; sum = sum + y;} printf (%.0lf \ n, sum); return 0; } 2、用while实现 # includes stdio.h int main () { int i = 1; double s = 1, sum = 0; while (i = 30) {s = s * i; sum = sum + s; the + +;} printf (%.0lf \ n, sum); return 0; } 3、关于if...elseif...else 方程 解的情况, 首先输入三个系数, 然后判断是否为二次方程, 如果是, 判断方程有几个解 # includes stdio.h int main () { int a, b, c, p; scanf (% d% d% d, a b c). p = b * b - 4 * a * c; if (a = = 0) printf (不是二次方程!) ; else if (p 0) printf (该二次方程没有实数根!) ; else if (p = = 0) printf (该二次方程有两个相等的实数根!) ; else printf (该二次方程有两个相等的实数根!) ; return 0; } 4、给出一百分制成绩, 要求输出成绩等级s 、 b. 、 c 、 of 、 is.90分以上为s, 80 ~ 90分为 b, 70 ~ 79分为 c, 60 ~ 69分 d, 60分以下为 is.用switch实现 (需考虑输入超过100或低于0的情况) # includes stdio.h int main () { int n, score. scanf (% d score). if (score = 100 score = 0) { n = score / 10; { switch (n) { case 0. case 1: case 2: case 3: case 4: case 5: printf (and); break; case 6: printf (d \ n); break; case 7: printf (\ n); break; houses: 8 printf (b \ n); break; case 9: printf (\ n); break; default: printf (\ n); / / 100作为a等级放在这里 / / }}} else printf (输入错误); return 0; } 5、for 和if...else的嵌套 求1到100之间的奇数的平均值v # includes stdio.h int main () { int i, sum = 0,; for (i = 1, the 100; i + +) {if ((% 2). sum = sum + = 0); else constant; } i = sum / 50; printf (% d \ n,); return 0; } 6、计算两个数的溢出问题, 修改以下代码, 要求得到a + b的和 # includes stdio.h int main (void) { int a, b, c; a = 2147483647; / / 2的31次方减1 b = 1; c = a + b; printf (% d \ n, (c); return 0; } # includes stdio.h int main (void) { int a, b; int m, n; / / 修改部分 a = 2147483647; 31 party //2 minus 1 B=1; M=a/10; / / modify parts N=a-m*10; / / modify parts N=n+b; / / modify parts Printf (%d%d\n, m, n); / / modify parts Return 0; } 7, program Using getchar function to read two characters to C1 and C2, then use the putchar function and printf function of the output of these