八重洲 使用说明（The use of YAESU）.docVIP

八重洲 使用说明（The use of YAESU） YAESU FT-7800, FT-7900 detailed instructions BI7NMP 2011-10-5 21:02:26 -------------------------------------------------------------------------------- A set of frequency. 1. in the host set (1) open source (2) according to the (V/M.MW) key to enter the VFO (frequency) state; (3) short press (BAND.SET) key settings you will use the band, such as 144 or 430 or 850; (4) rotary knob to set the channel you want to use the frequency, short press (MHZ.PRI) key, will directly adjust the frequency before the decimal digital display. 2. hand microphone set directly (MH-48 hand microphone) (1) open source; (2) according to the (V/M.MW) key to enter the VFO (frequency) state; (3) you want to use the frequency directly by hand on the microphone input. Two. Set the tone According to the 1. key (BAND.SET) for more than a second, enter the menu, with a rotating knob to select channel forty-fourth TNFRQ menu, press (BAND.SET) key to enter this option, you need to use the value selection of sub channel rotary knob, and then press the button (BAND.SET) for more than a second, exit menu. 2. click (TONE.HM/RV) button, ENC display, 3 seconds after the automatic return frequency display, the screen will display the ENC small, subsonic. Three. Set the frequency difference 1. the elimination of the default sound. According to the sub station (BAND.SET) key for more than a second, enter the menu, with a rotating knob to select channel fourth ARS menu, press (BAND.SET) key to enter this option, by rotating the knob to select the OFF channel, and then press the button (BAND.SET) for more than a second, exit menu. 2. set the frequency difference value. According to the (BAND.SET) key for more than a second, enter the menu, with a rotating knob to select channel thirty-ninth SHIFT menu, press (BAND.SET) key to enter this option, you need to select the difference frequency value of the rotary knob channel (BAND.SET), and then press the button for a second or more. Exit