在县深入习实践科学发展观活动总结大会上的讲话(修改).docVIP

巩固和扩大学习实践活动成果 为在新起点上再创广丰新辉煌而努力奋斗 ——在全县深入学习实践科学发展观活动 总结大会上的讲话 倪美堂 （2010年4月14日） 同志们： 根据中央和省、市的统一部署，今天，我们召开全县深入学习实践科学发展观活动总结大会，主要目的是对学习实践活动进行全面总结，动员全县各级党组织和广大党员进一步巩固和扩大学习实践活动成果，真正把科学发展观贯穿到今后各项工作中去，为实现在新起点上再创广丰新辉煌提供有力保证。 下面，我讲三点意见： 一、精心谋划，有序推进，全县学习实践活动取得明显实效 在全党开展深入学习实践科学发展观活动，是党的十七大作出的重大战略部署。紧紧围绕“党员干部受教育、科学发展上水平、人民群众得实惠”的总要求，牢牢把握“坚持解放思想、突出实践特色、贯彻群众路线、正面教育为主”的原则，把开展学习实践活动与落实“三保一弘扬”、积极应对国际金融危机冲击、保持经济平稳较快发展紧密结合起来，精心组织部署，顺利完成了第二、第三批学习实践活动。整个学习实践活动进展顺利，实现了预期目标，取得了明显成效 the same direction of rotation 90 ° or 180 ° for; after each disc rotor when measuring position alignment of the two half coupling constant, should also be in terms of accuracy and consistency. Surface deviation measurement, must in every 180 degrees corresponding to the two radii are equal to each other in order to eliminate errors caused by movement of the rotor. Only a support bearing of the rotor, WA couplings, such as the use of temporary leave the Center, should pay attention to keep the rotor in the measuring process in the center of the bearing oil retaining the nest does not change. Steam oil block, there should be sufficient clearance between the rotor and, in rotors make sure rotor is not on the block or seal oil. At the time of measurement, connections are not allowed between two rotors, each in a free State. Not allowed in case of assembled sleeve, Center work on the toothed coupling. Coupling tool should have adequate stiffness, installation must be secure and reliable. Coupling Center using a dial indicator, the table should be put in prison and avoid touching, to ensure correct measurement. Coupling disc after a week to return to the original position, circumference of dial gauge reading should be able to go back to the original value. When measuring the clearance of end, into the feeler of the gap should not exceed four at a time, when the gap is too large, you can use the gasket with the feeler gauge measurement of gauge blocks or finishing. bearing surface, markup should be in accord