PCT25VF512A-P 天玖隆 512K 串行FLASH.pdf

512 Kbit SPI Serial Flash PCT25VF512A SST25VF512A512Kb Serial Peripheral Interface (SPI) flash memory Data Sheet FEATURES: • Single 2.7-3.6V Read and Write Operations • End-of-Write Detection • Serial Interface Architecture – Software Status – SPI Compatible: Mode 0 and Mode 3 • Hold Pin (HOLD#) • 33 MHz Max Clock Frequency – Suspends a serial sequence to the memory • Superior Reliability without deselecting the device – Endurance: 100,000 Cycles (typical) • Write Protection (WP#) – Greater than 100 years Data Retention – Enables/Disables the Lock-Down function of the • Low Power Consumption: status register – Active Read Current: 7 mA (typical) • Software Write Protection – Standby Current: 8 µA (typical) – Write protection through Block-Protection bits in • Flexible Erase Capability status register – Uniform 4 KByte sectors • Temperature Range – Uniform 32 KByte overlay blocks – Commercial: 0°C to +70°C • Fast Erase and Byte-Program: – Industrial: -40°C to +85°C – Extended: -20°C to +85°C – Chip-Erase Time: 70 ms (typical) – Sector- or Block-Erase Time: 18 ms (typical) • Packages Available –