建筑预算知识（Building budget knowledge）.docVIP

建筑预算知识（Building budget knowledge） RadioButtonList 2002 5, 6 multiple-choice questions, comprehensive title 18, accounts for 18.125% of the total score (160 points); 2003 RadioButtonList multiple-choice 4 points, 6 points, accounted for 6.25% of the total score (160 points). The average score of 19.5 points for two years, accounted for 12.19% of the total score (160 points). Expected 10 to 15 points (100 points). This chapter RadioButtonList, multiple-choice questions for higher scores, if a comprehensive problem counted scores will be higher. The change of teaching material: No. The emphasis of this chapter: 1. building area calculation rules; 2. calculation of Engineering quantity: (1) artificial excavation; masonry; (2) (3) calculation of concrete, reinforced concrete, concrete and steel template. The first section of engineering drawing First, engineering drawings and classification (understand) (a) the basic provisions 1. map: refers to the size of the drawings. From A0 to A4 were divided into five types. 2. title bar; 3. lines; 4. illustrations: The proportion of 5.: the pattern size and physical pattern in the linear size ratio as the ratio of. Definition the drawing of the graph size and practice of the corresponding linear size ratio. The size refers to the ratio of the size. 1:20 1:200, who is the score? Who is a large proportion of. The proportion of a building that used -- commonly used small proportion, namely 1:100 and 1:200; and the detail detail by a large proportion of 1:20 and 1:10. Examples: A1 format drawings said a 85m long, 25m wide residential plan, the scale of application (). A.1:1000 B.1:200 C.1:20 D.1:10 Answer: B Analysis: 1:10 and 1:20 are used in detail. 6. axis positioning and number: Definition: as the axis of walls, columns, beams and other main stress components to the positioning line. It is usually expressed by marking. Arabia: the number of numbers and letters. Handwriting icon 0601-01 Additional: single axis said columns, a smal