氧化锌的作用（The role of Zinc Oxide）.docVIP

氧化锌的作用（The role of Zinc Oxide） The application of Zinc Oxide Zinc Oxide is the rubber and tire industry indispensable additive, also used as natural rubber, synthetic rubber and latex vulcanizing agent and reinforcing agent and colorant. If the ordinary Zinc Oxide made of nano Zinc Oxide used in rubber, can fully accelerate vulcanization and improve the performance of the rubber, the dosage is only 30% ~ 50% of the ordinary Zinc Oxide. The research area of Zinc Oxide is very important, Zinc Oxide surface areameasurementdataonlyusing BET method detected result is true and reliable, the detection of many instruments can only make a direct comparison, at presentalso are eliminated. At present the specific surface area of the bet unified testing method at home and abroad, worked out standard for determination of specific surface area is bet based testing methods, please refer to the national standard (gb/t 19587-2004) - Determination of specific surface area of solids by the gas adsorption principle bet. Detection of specific surface area is relatively time consuming work, because the absorption capacity of the sample, somesampletest mayneed a day, if the test did not achieve a fully automated process, the test personnel can not leave on time and to a high degree of concentration, observation of the dashboard, the control knob, a little inattentive it will lead to the failure of the test process, this test will waste a lot of staff time. 2400 F-Sorb specific surface area analyzer can achieve the detection function by BET (bothdirectcomparison method), is more important than the F-Sorb 2400 surface area analyzer is so far the only fully automated intelligent surface area detection equipment, the test results and the consistency is very high, the stability is also very good, at the same time to reduce human error, improve the accuracy of the test results. In the chemical industry, Zinc Oxide is widely used as a catalyst, desulfurization agent, such as the synthesis cataly