混凝土外加剂合成技术复配技术的工程应用（Engineering application of synthetic technology of concrete admixture）.docVIP

混凝土外加剂合成技术复配技术的工程应用（Engineering application of synthetic technology of concrete admixture） Concrete, concrete, precast concrete, is now a large number of chemical admixtures. How efficient use of additives, not only energy-saving and economic problems of the low cost, but also a technical problem. At the same time is problem oriented foreign additive for future development. Because of my foreign additive market resources are relatively abundant, the dominant position in the market, dominate the additive performance by the buyer of the technical requirements. The additive technology development will inevitably be affected, how scientific and rational use of additives, to play its due role, the additive production engineering application, make some analysis. First, the application of additives according to the market situation, purpose to 1, to meet the needs of commercial concrete transportation, for the purpose of pumping admixture. This kind of additives mainly for low volume content is 1% ~ 1.5%. Its characteristics are relatively low water reducing rate, good workability but corrosion effect. The purchaser using such an admixture to the water cement ratio are larger, or with low water cement. The purchase price is low. The amount of cement and concrete aggregate cost. Compared with the blank concrete admixture is enhanced. 2, to meet the requirements of commercial concrete, water reducing admixture is required. The amount of admixture in 2 - 2.5%, the purchase of the cement water amount is larger, or more varieties. Taking the concrete aggregate price moderate, can choose a part of the material price low. Taking concrete strength increased compared with blank. 3, to meet the market demand, the supply of high strength concrete and special concrete admixtures for the purpose of use. The amount of admixture is 2.5 ~ 3%, the water cement admixture is relatively low, the purchase of sand, stone clay content, fineness, particle size, powder and water are required. At t