手机电池管理,交你如何省电、保护电池（Mobile phone battery management, how do you save electricity, protect the battery）.doc

手机电池管理,交你如何省电、保护电池（Mobile phone battery management, how do you save electricity, protect the battery） Mobile phone battery charging important For mobile phone batteries activation, many say is: must be more than 12 hours charging time before three, in order to activate the battery. This argument is misleading due to the previous Ni MH battery, mobile phone in factory have activated aging, users do not need to activate when in use, dont make a long time 12 hours to recharge. According to the instructions on the mobile phone charging method of charging is the standard. In addition, the mobile phone lithium battery or the battery charger will automatically stop after a charge, there is no electricity nickel charger for 10 hours the so-called trickle charging. That is to say, if your lithium batteries in full, on the white charger is also sufficient. And we can not guarantee the charge and discharge protection circuit features and never change the quality of the battery so your battery will be no danger of anything going wrong, has long been hovering on the brink of danger. This is another reason why we oppose long charging. The correct approach for mobile phone battery: 1, in accordance with the standards and procedures of charging time, even if it is to do so before three; when the mobile phone battery is too low when prompted, should promptly start charging; 2, try to avoid bedtime charging, because before the charging time is longer, and the night voltage instability, many parts of the night are relatively high and voltage fluctuations, the greater impact on the battery. Activated 3, lithium batteries do not need special method, the normal use of lithium battery in the mobile phone will naturally activated. Related issues of GPRS and e-mail set Related issues of GPRS and e-mail set Q. how to use GPRS/3G to connect to the Internet? If you want to open or close the GPRS/3G, please press the main menu menu, and then select a set of wireless network control. Select the