手机存储（Mobile storage）.docVIP

手机存储（Mobile storage） CMOS is a computer motherboard on a special RAM chip, the system parameter is stored somewhere, and BIOS in the system setup program is complete parameter setting method. CMOS memory is used to save the data set after the storage of BIOS, including hardware configuration and user system set some parameters, such as the traditional BIOS system and password boot devices etc.. On the motherboard CMOS is a read-write RAM chip, hardware configuration and user to save the current system for setting the parameters, the contents can be read by the setup program. BIOS is a group of curing to a computer motherboard chip ROM procedures, it retains the basic input and output of the most important computer program, system configuration information, boot self-test program and system startup program. Its main function is to provide the most basic, direct and control the hardware settings for computer. BIOS is a set of hardware computer program, stored in a EPROM block or EEPROM chip, important information and system parameters are set inside the system with the BIOS Setup setup program. The BIOS setup program is stored in the BIOS chip, BIOS chip on the motherboard is a rectangular or square core Pull out the button battery can restore BIOS to the default value Only, can be set at boot time. (usually when the computer is started by F2 or Delete into the BIOS settings. Some special models by F1, Esc, F12 etc.) Only the CMOS chip data storage function, and the various parameters of the CMOS modification can be achieved by setting the BIOS program. CMOS is mainly used for parameters and data storage BIOS setup program settings, and BIOS setup of computer basic input output system management and configuration, make the system run in the best condition, using the BIOS setup program can also exclude system or fault diagnose system problems. `1.bios fixed on ROM, CMOS fixed on ram. (CMOS save the parameters set by the BIOS) CMOS? RAM itself is only a memory, only the