无法正常关机（Cannot shutdown properly）.docVIP

无法正常关机（Cannot shutdown properly） The fault is not normal shutdown or failure. How to solve this kind of trouble? The reason, process and fault shutdown Windows shutdown procedures in the process of the implementation of the shutdown function: complete all disk write operation, remove the disk cache, close window procedure, close all currently running programs, all protected mode drivers into a real mode. The main reason causing Windows system shutdown failure: opt out Windows sound file damage; incorrect configuration or hardware damage; the setting is not compatible with BIOS; BIOS in the advanced power management or advanced configuration and power interface is not appropriate; not in real mode for video card distribution a IRQ; a TSR program or program may not be properly closed; loading an incompatible, damaged or conflicting device driver etc.. Two, failure analysis and solution 1. exit Windows sound file damage First of all, you can set the exit Windows sound file is damaged, click start, Settings, control panel, then double-click sound. In the event box, click exit Windows. In the name, click (no), then click OK, then turn off the computer. If the Windows is shut down, the problem is caused by the exit sound file, in order to solve this problem, please select the following an operation: restore sound files from backup; re install provide sound files; configure Windows to not play exit Windows sound file. 2. fast shutdown is not normal Fast shutdown is new in Windows 98, can greatly reduce the shutdown time. However, this feature is not compatible with some hardware, if the hardware installed in a computer, may cause the computer to stop responding. You can disable fast shutdown, first click the start - run, open box, type Msconfig, then click OK (see Figure 1). Click the advanced to disable fast shutdown, click OK, click OK again. Prompted to restart the computer to restart. If the computer can quickly shutdown, shutdown function may not be compatible with on