滚动轴承加速寿命试验技术研究_徐东详解.pdfVIP

32 6 JOURNAL OF NATIONAL UNIVERSITY OF DEFENSE TECHNOLOGY Vol. 32 No. 6 2010 : 1001- 2486(2010) 06- 0122- 08 1 1 1 2 1 徐 东 , 徐永成, 陈 循 , 李兴林 , 杨拥民 ( 1. , 410073; 2. , 310022) : , , , , , , : ; ; ; ; :TH1331 :A Research on Accelerated Life Test for Rolling Element Bearings 1 1 1 2 1 XU Dong , XU Yongcheng , CHEN X n , LI Xinglin , YANG Yongmin ( 1. College of Mechatronics Engineering and A tomation, National Univ. of Defense Technology, Changsha 410073, China; 2. Hangzho Bearing Test Research Center (HBRC) , Hangzho 310022, China) Abstract: In order to obtain valid and comparable data from ALT for rolling element bearings, almost all problems which may appear in the process of ALT for rolling element bearings were investigated comprehensively. Then an orbic lar method of ALT for rolling element bearing was proposed based on the existent standardizations of ALT for rolling element bearings and experience acc m lated in the process of act al design and implementation. The method has complemented s ch omissions as proexperiment checking, niformity verification and signal processing which the existent standardizations and traditional life test schemes have not considered, and then formed an integral solving scheme of ALT for rolling element bearings. This scheme can be sed as a g ide for the design and application of ALT for rolling element bearings. Key words: rolling element bearing; accelerated life test; niformity verification; accelerated model; accelerated coefficient , , , [ 1] 1967 , , , :