P3213pHCombinedElectrodeOperatingGuidepH复合电极用户手册.PDF

Agilent P3213 pH Combined Electrode pH 复合电极 Operating Guide 用户手册 Agilent Technologies Overview The P3213 pH Combined Electrode has a flat tip that can mea- sure the pH of an object surface or a sample with a small vol- ume. It is used with the 3200P meter or similar meters. WARNING Use this electrode according to the operating manual to avoid personal injury. The electrode solution can cause chemical burns or WARNING illness if it is taken orally or contacted by human skin. Use protective clothing or gloves to avoid contact. In case of contact, rinse contacted area with tap water or deionized water thoroughly. CAUTIONCAUTION The electrode body material is glass. Handle with care to avoid damage to the instrument. P3213 pH Combined Probe 3 Specifications Table 1 P3213 pH Combined Electrode specifications Specification Value pH range 0 to 14 Zero potential pH 7.00 ± 0.5 Temperature range 0 to 60 °C Probe impedance 500 M Reference type Ag/AgCl Body material PC Liquid junction material Fiber Reference filling solution 3 mol/L KCl saturated with AgCl Probe diameter 12 mm Probe length 120 mm Cable connector BNC Cable length 1000 mm 4 P3213 pH Combined Probe Figure 1 P3213 pH Combined Electrode assembly P3213 pH Combined Probe 5 Operation Preparing the electrode 1 Remo