ultrasonic guided waves in piezoelectric layered composite with different interfacial properties超声导波在压电层状复合不同界面性质.pdf

Hindawi Publishing Corporation Advances in Materials Science and Engineering Volume 2011, Article ID 701819, 7 pages doi:10.1155/2011/701819 Research Article Ultrasonic Guided Waves in Piezoelectric Layered Composite with Different Interfacial Properties Xiao Chen1, 2 1Jiangsu Key Laboratory of Meteorological Observation and Information Processing, Nanjing University of Information Science and Technology, Nanjing 210044, China 2 School of Electronic and Information Engineering, Nanjing University of Information Science and Technology, Nanjing 210044, China Correspondence should be addressed to Xiao Chen, rainofsun@ Received 14 June 2011; Accepted 20 August 2011 Academic Editor: Wen-Hua Sun Copyright © 2011 Xiao Chen. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. Combining the propagation model of guided waves in a multilayered piezoelectric composite with the interfacial model of rigid, slip, and weak interfaces, the generalized dispersion characteristic equations of guided waves propagating in a piezoelectric layered composite with different interfacial properties are derived. The effects of the slip, weak, and delamination interfaces in different depths on the dispersion properties of the lowest-order mode ultrasonic guided wave are analyzed. The theory would be used to characterize the interfacial properties of piezoelectric layered composite nondestructively. 1. Introduction property is closely related to the coupling strength between layers in the structure and the level of acoustic imp