remotely controlled automated horse jump远程控制自动化的马跳.pdf

Circuits and Systems, 2011, 2, 25-33 doi:10.4236/cs.2011.21005 Published Online January 2011 (http://www.SciRP.org/journal/cs) Remotely Controlled Automated Horse Jump Ibrahim Al-Bahadly, Joel White School of Engineering and Advanced Technology Massey University, Palmerston North, New Zealand E-mail : i.h.albahadly@massey.ac.nz, joely__boy@ Received October 24, 2010; revised November 22, 2010; accepted November 25, 2010 Abstract With the application of automation, a horse jump can be controlled with the push of a button, or even a re- mote control. This enables the rider to adjust the jump to suit their needs wh ile still on their horse. The ob- jective of this work is to design and build a wireless remote motor controller which will be applied to a pro- totype horse jump. The user will be able to control the forward and reverse direction of the motor by pushing a button or switch via RF remote control. A horse jump prototype consisting of a single jump stand will be constructed. Keywords: Automation, Horse Jump, Dc Motor, RF Remote Control 1. Introduction motor. The input signal is sent to the controller through the wireless RF interface. Horse jumping is one of the most exciting of all equine sports and one of the few to enjoy the prestige of being 1.3. Wireless Interface an Olympic event. For many riders, the tedious routine of setting up jumps and constantly adjusting their height The interface receives an RF signal from the user input seems like an un-avoidable task. With the application of and sends it to the controller. The RF module sends the automation, a horse jump can be controlled with the push encoded signal from a transmitter to