research on blind source separation for machine vibrations研究盲源分离机器振动.pdf

Wireless Sensor Network, 2009, 1, 453-457 453 doi:10.4236/wsn.2009.15054 Published Online December 2009 (/journal/wsn). Research on Blind Source Separation for Machine Vibrations Weiguo HUANG, Shuyou WU, Fangrang KONG, Qiang WU Department of Precision Machinery and Precision Instrumentation, University of Science and Technology of China, Hefei, China Email : wghuang@ Received August 3, 2009; revised August 18, 2009; accepted August 20, 2009 Abstract Blind source separation is a signal processing method based on independent component analysis, its aim is to separate the source signals from a set of observations (output of sensors) by assuming the source signals in- dependently. This paper reviews the general concept of BSS firstly; especially the theory for convolutive mixtures, the model of convolutive mixture and two deconvolution structures, then adopts a BSS algorithm for convolutive mixtures based on residual cross-talking error threshold control criteria, the simulation test- ing points out good performance for simulated mixtures. Keywords: Blind Source Separation, Independent Component Analysis, Convolutive Mixtures, Machine Vibration, Residual Cross-Talking Error 1. Introduction 2. BSS Blind source separation (BSS) is a typical tool to recover 2.1. BSS Introduction source signals from several observations usually pro- vided by a set of sensors. Due to the lack of prior Blind source separation is a signal processing technique knowledge of the source signals, generally, this me