stability conditions of fuzzy filter type iii稳定性条件的模糊滤波器类型iii.pdfVIP

Journal of Signal and Information Processing, 2011, 2, 245-251 doi:10.4236/jsip.2011.23034 Published Online August 2011 (http://www.SciRP.org/journal/jsip) Stability Conditions of Fuzzy Filter Type III 1 2 2 José de Jesús Medel Juárez , Juan Carlos García Infante , Juan Carlos Sánchez García 1Centre of Computing Research, National Polytechnic Institute, Vallejo, México; 2Professional School of Mechanical and Electrical Engineering, National Polytechnic Institute, Coyoacan, México. Email: jjmedelj@.mx, jcnet21@yaho , jcsanchezgarcia@ Received October 12th, 2010; revised February 10th, 2011; accepted February 17th, 2011. ABSTRACT A digital fuzzy logic filter of type III interacts with a real model signal reference to obtain the best answer in the sense of minimum mean square error of the output. The key part of the filter is a fuzzy mechanism that adaptively selects and emits answer according to the changes of the external reference signal. Based on input signal level, this fuzzy filter se- lects the best parameter values from a set of membership in the knowledge base (KB), and the filter weights are updated according to the reference signal in a natural form. With this fuzzy structure the filter reduces error. The simulation result shows the stability of the filter. The states of the filtering process require that all of its answers are bounded by the error criteria probabilistically. Keywords : Digital Filtering , Fuzzy Systems, Estimation, Stability 1. Introduction The fuzzy intelligent tool as learning techniques in a digital filtering is an option to obtain different decision One of the best tools used to approximate an external