stability loss of rotating elastoplastic discs of the specific form稳定旋转弹塑性损失光盘的具体形式.pdfVIP

Applied Mathematics , 2011, 2, 579-585 doi:10.4236/am.2011.25077 Published Online May 2011 (http://www.SciRP.org/journal/am) Stability Loss of Rotating Elastoplastic Discs of the Specific Form 1 2 Dmitrii Makarovich Lila , Anatolii Andreevich Martynyuk 1Cherkasy National Bohdan Khmelnytsky University, Cherkasy, Ukraine 2Stability of Processes Department, S. P. Timoshenko Institute of Mechanics of the National Academy of Sciences of Ukraine, Kyiv, Ukraine E-mail : dim_l@ Received February 17, 2011; revised March 25, 2011; accepted March 28, 2011 Abstract A method of calculating a possible stability loss by a rotating circular annular disc of variable thickness is suggested within the theory of perfect plasticity with the help of small parameter method. A characteristic equation for a critical radius of a plastic zone is obtained as a first approximation. The formula for the critical angular velocity, determining the stability loss of the disc according to the self-balanced form, is derived. The method using which we can take into account the disc’s geometry and loading parameters is also speci- fied. The efficiency of the proposed method is shown in Section 5 while considering an illustrative example. The values of critical angular velocity of rotating are found numerically for different parameters of the disc. Keywords: Axisymmetric Elastoplastic Problem, Boundary Shape Perturbation Method, Rotating Circular Annular Disc, Stepped Disc, Stability Loss, Critical Angular Velocity 1. Introduction external bounda