大功率变流器共模电压产生及抑制研究-工矿自动化.PDF

10 工 矿 自 动 化 No. 10 2010 10 Industry and Mine Automation Oct. 2010 : 1671- 251X( 2010) 10- 0016- 06 章勇高, 李银玲 ( , 001 ) : 通过三相等效电路详细分析了H 桥多电平变流器共 电压的产生机理, 介绍了共 电压对大功 率变流器及变频调速系统的危害; 讨论了目前共 电压抑制技术的研究现状, 分析了外加滤波装置和改变变 流器结构的硬件抑制方法及采用控制策略的软件抑制方法的特点及其不足, 为研究新的共 电压抑制策略 提供了参考; 最后, 提出未来大功率变流器共 电压抑制的研究重点: 一是兼顾直流电压利用率和谐波含量 的最优共 电压抑制方法, 二是从本质上找出一种通用于各种拓扑结构的完全消除共 电压的统 一算法 : 大功率变流器; 变频调速系统; 共 电压; 抑制; 直流电压利用率; 谐波含量 : TD60; TM464 :A Research of Generating and Suppressing of Commonmode Voltage in H igh Pow er Converter ZHANG Yonggao, LI Yinling ( School of Electrical and Electronics Engineering of East China Jiaotong U niversity , Nanchang 001 , China) Abstract: T he paper analyzed generating mechanism of CMV of cascade multilevel converter w ith a threephase equivalent circuit in details and introduced harms to high pow er converter and frequency conversion speedregulation system caused by CMV. T hen it discussed researching situation of suppressing CMV at present and analyzed characteristics and disadvantages of suppressing CMV methods w ith hardw are named adding filtering equipments and changing converter s structure and suppressing CMV method w ith softw are named control strategy, so as to provide some reference for researching a new strategy to suppress CMV. At last, it proposed some future research targets of suppressing CMV of high pow er converters: firstly, it is important to find an optimal suppressing CMV method w hich can take account of utilization of DC voltage and harmonic content; secondly, it is necessary to find a unified algorithm for completely eliminating CMV w hich is suitable for all topologies. Key words: high po