pdca（PDCA）.docVIP

pdca（PDCA） PDCA also called Dai Minghuan, is a general model of management, the earliest Hugh Hart (Walter A. Shewhart) in 1930 and was later on American quality management expert Deming (Edwards Deming), in 1950 once again excavated, and be widely publicized and used in the process of continuous improvement of product quality. It is a scientific procedure that should be followed by total quality management. The whole process of total quality management activities is the process of quality planning and organization implementation. This process is the [1][2] that runs in cycles according to the PDCA cycle. PDCA cycle is a logical work program that can make any activity effective, especially in quality management. The four letters of P, D, C, and A represent the following meanings: P (Plan) - plan. Including the determination of policies and objectives, and the formulation of activity plans; II. D (DO) - implementation. Execution is concrete operation, implementation of the content of the plan; C (Check) - check. Is to sum up the results of the implementation plan, identify what is right, what is wrong, clear effect, identify problems; A (Action) - action (or treatment). To sum up the results of inspection, to deal with the success of the experience to be affirmed, and standardized, or formulate work instructions, for future work to follow; the failure of the lesson should be summarized, so as not to reproduce. For problems that are not resolved, they should be addressed in the next PDCA loop. PDCA is the English word Plan (plan), Do (Executive), Check (check) and Act (correct) the first letter of the PDCA cycle is in accordance with the order of such quality management, and to carry on the science than the cycle program. The operation of the overall quality management activities can not be separated from the rotation of the management cycle, that is to say, to improve and solve the quality problems and catch up with all the advanced work, we should use the scientific