第二章 粘接原理与粘接技术（The second chapter is bonding principle and bonding technology）.docVIP

第二章 粘接原理与粘接技术（The second chapter is bonding principle and bonding technology） This article is contributed by barefoot veterinarian 1988 Ppt documents may experience poor browsing on the WAP side. It is recommended that you first select TXT, or download the source file to the local view. Elective course Multimedia courseware stick meet Speaker: Speaker: Zhao Xin, Suzhou University of Science and Technology agent3-29 One The second chapter is bonding principle and bonding technology The main content of this chapter is Section 2.1 surface characteristics of adherend and surface bonding strength and curing requirements Section 2.5 Section 2.2 influence of wetting and bonding theory method, Section 2.3 2.4 adhesive surface adhesive material, the adhesive joint design of 2.6 factors3-29 2 Section 2.1 is the surface characteristics of adhesive material and surface treatment requires a solid surface morphology. 1. The roughness of the solid surface 2, the porosity of the solid surface 3, the adsorption and complexity of the solid surface 4, the defects of the solid surface3-29 Three Section 2.1 is the surface characteristics of adhesive material and surface treatment requirement of two. By processing the adherend surface requirements Purification of the adherend surface - mechanical method 1, purifying treatment machinery adhesive physical mechanical surface method: washing: change the adherend surface physical and chemical properties, chemical method, 2 changes are activated surface physical and chemical properties of the adherend surface chemical method: metal surface activation of polymer materials:3-29 Four Section 2.2 wetting and bonding theory Uniform spreading of wetting liquid under the action of intermolecular force on the solid surface. Indicates the affinity of liquids to solids. Surface tension of matter: In general, the surface tension of metals, oxides and inorganic substances is larger, about 0.2-5N, m-1., polymers, sol