HAD-YCB变频门机说明书(中英文对照).pdfVIP

1 HAD-YCB 型矢量控制永磁同步变频电梯门 机控制器使用说明书 Instruction of Type HAD-YCB Permanent magnet Synchronous Elevator door motor controller using Vector variable frequency control 天津市核奥达新技术开发有限公司 TIANJIN HEAODA NEW TECHNOLOGY DEVELOPMENT CO.,LTD 1 1 重要提示： Important notice: 1．轿厢运行前给出关门指令! Before car runs, close door command must be given! 2 ．轿厢运行中必须始终给出关门指令！！！ In the process of car running, close door commend must always be given!!! 3 ．开关门控制信号必须是无源触点！ The control signal of opening or closing door must be passive contact. 4 ．厅轿门联动，不管门处于何种位置，不大于150 牛顿力作用于门扇时，门应能够正常关闭。 When the landing door and the cage door move synchronously, wherever place the doors are, and when the power is not more than 150N at on the door panels, the door can close normally. 5．矢量控制永磁同步变频门机使用4096 磁电编码 器。 Vector control permanent magnet synchronous frequency conversion door operator use 4096 magnetoelectricity encoder. 6 ．对于同步门刀门机必须保证收刀后，再接通副 门锁以确保电梯安全运行。 To the door operator having synchronous door knife must ensure that get auxiliary door lock after close the door knife. 7．电机外壳、门机控制器外壳、AC220 电源的地 线，必须可靠接地！！！ The motor casing, door controller shell and the power ground line of AC220 power supply are earthed properly. 2