网站大量收购独家精品文档,联系QQ:2885784924

复印机故障多例(There are many faults in the copier).doc

复印机故障多例(There are many faults in the copier).doc

  1. 1、本文档共7页,可阅读全部内容。
  2. 2、原创力文档(book118)网站文档一经付费(服务费),不意味着购买了该文档的版权,仅供个人/单位学习、研究之用,不得用于商业用途,未经授权,严禁复制、发行、汇编、翻译或者网络传播等,侵权必究。
  3. 3、本站所有内容均由合作方或网友上传,本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺!文档内容仅供研究参考,付费前请自行鉴别。如您付费,意味着您自己接受本站规则且自行承担风险,本站不退款、不进行额外附加服务;查看《如何避免下载的几个坑》。如果您已付费下载过本站文档,您可以点击 这里二次下载
  4. 4、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等,请点击“版权申诉”(推荐),也可以打举报电话:400-050-0827(电话支持时间:9:00-18:30)。
查看更多
复印机故障多例(There are many faults in the copier)

复印机故障多例(There are many faults in the copier) There are many faults in the copier Fault 1 Fault phenomenon: a Ricoh FT 4495 copier toner, recently because, to replace the toner, soon no powder lights still bright, suggesting that toner is not enough, the main motor idling stop, can not copy. Fault analysis and Troubleshooting: according to the fault phenomenon, it is estimated that the toner cartridge is not installed in place, resulting in reloading toner cartridges, and check the toner amount is correct, the boot to try again, the failure is still. Open the front cover and observe the transmission of the powder feeding mechanism. It is found that the rotating powder feeding roller gear can drive the driving wheel and the stirring gear to rotate, indicating that the fault appears on the driving part of the stirring gear to the toner box. Remove the toner cartridge, toner cartridge between found gear broken and powder stirring gear, resulting in the toner powder stirring roller does not rotate, the toner cartridge for powder, the machine does not work, no powder toner cartridge to retrieve the original, will pour into the original toner cartridge, ink cartridge reloading, troubleshooting. Summary: when you change the toner cartridge, you must first gently shake the new box, so that toner distribution evenly, and turn the powder roller, so that it is flexible rotation, no dead center, you can install. Otherwise, will cause a stir roller gear broken phenomenon, causing unnecessary losses. Fault 2 Fault phenomenon: a Ricoh FT4490 copier, used for nearly a year, a copy of A3, B4, A4 copy paper is normal, but when there are B5 paper jam phenomenon, and the operation panel display card position is always at B (fixing part). Failure analysis and maintenance: due to A3, B4 copy paper, that copier electrical part no fault estimation problem in mechanical parts, A3 and A4, B4 and B5 paper width are the same, only different length. Carefully observe the copying process, found t

您可能关注的文档

文档评论(0)

f8r9t5c + 关注
实名认证
内容提供者

该用户很懒,什么也没介绍

版权声明书
用户编号:8000054077000003

1亿VIP精品文档

相关文档