技术专业培训资料（Technical training materials）.docVIP

技术专业培训资料（Technical training materials） The main work of training materials A professional, technical Basic knowledge of company, 1 Answer: an annual output of 3 million 300 thousand tons of coke, six 55 hole 6mJN60 82 type stove, oven dry coal capacity per hole and an average of 28 tons each, small fashion 6 holes, the amount of coal used one or two day (wet basis) with the amount of coal, three daily average 8800t (wet basis) average 4400t. 2, China bituminous coal, coking coal classification of our company. Answer: twelve categories: non caking coal, lean coal, lean coal, long flame coal, 1/ 2caking coal and weakly caking coal, gas coal and 1/3 coking coal, gas coal, fat coal, coking coal. The company with the coal classification: lean coal, coking coal, fat coal and 1/3 coking coal and weakly caking coal, gas coal The main characteristics and uses 3 types of coal Answer: (1) weakly caking coal Water, weak bond, high volatility, colloid heating can produce less, can separate a coke coke, but small and fragile, high rate of coke powder. This is mainly used for coal gasification feedstock and fuel. (2) coal High volatile and glial layers thick, poor thermal stability. Can separate coke, coke refining the slender but fragile, shrinkage, and longitudinal crack, breaking resistance and abrasion resistance. It can only be used for coking coal, also can be used in oil refining, gas production, manufacturing fertilizer or as power fuel. (3) fat Has good adhesion and moderate and higher volatile, heating can produce lots of colloid, the formation of glial layer is higher than 25mm, the strongest cokeability. With the coal coking, can make melting resistance and abrasion resistance are good coke, coke but the transverse crack, and the root part of coke often has bee coke, fragile into small pieces. Due to strong adhesion, therefore, it is the main component in coal blending for coking. (4) 1/3 coking coal It is a transition between coal and coking coal, fat coal and gas coa