各种设备SNMP协议配置.docVIP

各种设备SNMP协议配置各种设备SNMP协议的配置(一）2007-04-19 20:41Cisco设备 Catalyst OS配置SNMP的共同体名： set snmp community [read-only|read-write|read-write-all] community_stringIOS全局模式配置SNMP的共同体名：snmp-server community community_string [ro|rw]华为设备 IOS同Cisco配置方法Huawei OSswitchsuper[switch]sys[switch]snmp-agent community [read|write] community_string[switch]snmp-agent sys-info version allFoundry设备 同Cisco设备IOS配置方法港湾设备命令格式 ：config snmp community [readonly|readwrite] string[readonly|readwrite] 读确认/读写确认字符串默认值：string 字符串值 readonly：public； readwrite：private使用指导 community 字符串为远程网络管理员配置交换机提供了一种用户确认机制。在交换机上有两种Community 字符串：读确认字符串（readonly）允许对交换机进行只读访问；读写确认字符串（readwrite）提供了对交换机读写操作的权限。配置实例 Harbour(config)# config snmp community readonly harbourservice snmp enable相关命令show snmp community-stringExtreme设备configure snmp community命令格式 ：configure snmp community [readonly | readwrite] {encrypted} alphanumeric string命令描述：Configures the value of the default SNMP read or read/write community string.readonly Specifies read-only access to the system.readwrite Specifies read and write access to the system.encrypted Specifies encryption, for use only by the switch when uploading ordownloading a configuration. Should not be used through the CLI.alphanumeric string Specifies an SNMP community string name. 默认值：The default read-only community string is public. The default read/write community string is private.举例：以下命令是设置一个读写权限的共同体名extreme configure snmp community readwrite extreme用来替代第一种命令命令格式 ：configure snmp add community [readonly | readwrite] {encrypted} alphanumeric string命令描述：Adds an SNMP read or read/write community string.readonly Specifies read-only access to the system.readwrite Specifies read and write access to the system.encrypted Specifies encryption, for use only by the switch when uploading ordownloading a configuration. alphanumeric string Specifies an SNMP community string name. See “Usage Guidelines” for moreinformation.默认值：The default read-only community string is public. The