传输_选择题（Transmission _ choice）.docVIP

传输_选择题（Transmission _ choice） Two, one-way multiple-choice questions 1, the low loss and low dispersion region of optical fiber can be achieved in the 1450 - 1650nm wavelength range, and the corresponding bandwidth is (B) A, 2.5 B, 25 C, 5 D, 50 2, the propagation mode in step fiber is transmitted by light beam at the core and cladding interface (B), but the energy is concentrated in the core. A, semi reflection B, total reflection C, total refraction, D, and semi refraction 3, the refractive index of the multimode graded index fiber core is (A). A, continuous change B, constant C, discontinuous transformation D, almost unchanged 4, at present, the loss of fiber at (B) nm can be about 0.2dB/nm, close to the theoretical limit of optical fiber loss. A, 1050 B, 1550 C, 2050 D, 2550 5. The zero dispersion coefficient of the quartz fiber material is near nm (B). A, 127 B, 1270 C, 227 D, 2270 6, ordinary quartz fiber near the wavelength (A) nm, waveguide dispersion and material dispersion can cancel each other, so that the total dispersion of the two is zero. A, 1310 B, 2310 C, 3310 D, 4310 7, non-zero dispersion shifted single-mode fiber, also known as D, is a new type of fiber that can be designed and fabricated for wavelength division multiplexing transmission systems. A, G.652, B, G.653, C, G.654, D, G.655 Three, multiple-choice questions 1, according to the fiber cross-section refractive index distribution of the different, commonly used fiber can be divided into (AB). A, step fiber B, graded fiber C, single-mode fiber D, multimode fiber 2, the main factors of fiber loss are A, B, C, D, and additional losses. A, manufacturing loss B, connection loss C, coupling loss D, scattering loss 3 、 the low loss windows used in optical fiber communication are (A, C) and 1310nm band. A and 850nm bands, B and 1050nm bands, C and 1550nm bands, D and 2650nm bands 4, according to the causes of dispersion, the types of fiber dispersion can be mainly divided into (A, BC). A, mode disp