海洋石油201深水铺管起重船项目总线通讯问题研究.PDFVIP

SHIP ENGINEERING 船 舶 工 程 Vol.32 Supplement1 2010 总第 32 卷，2010 年增刊 1 “海洋石油201”深水铺管起重船项目 总线通讯问题研究 李 乐，汪保青 （江苏熔盛重工有限公司海洋工程部，江苏南通 226532 ） 摘 要：随着科学技术的发展，海洋工程产品自动化程度不断提高，总线通信以其节约硬点设计和 通讯电缆，高稳定性、强可靠性及快速响应和数据传递等特点广泛应用在高技术含量的海洋工程项目上. 以目前正在江苏熔盛重工有限公司进行建造和调试的超水深铺管起重船（海洋石油201 ）为例，具体为 海洋石油201 的通信拓扑结构，以及调试过程中碰到的问题，分析方法和解决思路，对海洋工程调试中 总线通讯问题进行探讨. 关键词：总线通信；海洋工程；深水铺管起重船；海工调试 中图分类号：U674.34, TP336 文献标志码：A 文章编号：1000-6982 (2010) S1-0036-04 Discussion about Bus Communication of Deepwater Pipelaying Floating Crane of “HAI YANG SHI YOU 201 ” LI Le, WANG Bao-qing (Offshore Engineering Department, Jiangsu Rongsheng Heavy Industries Co., Ltd, Nantong 226532, Jiangsu Province, China) Abstract: With the development of science and technology, the degree of offshore engineering automation is constantly improving. Bus communication is widely used in high technical offshore engineering projects due to its characteristics such as device dot saving design and communication cable, high stability, strong reliability, quick response and data transmission etc. This paper takes “HAI YANG SHI YOU 201”, the deepwater pipe laying floating crane which is currently built and commissioned by Rongsheng Heavy Industries Co., Ltd., as example, analyzes its communication topology structure and find solutions to the commissioning problems. Bus communication of offshore engineering commissioning is discussed and inferred. Key words: bus communication; offshore engineering; deepwater pipe laying floating crane; offshore engineering commissioning 0 前言 1.1 海工调试中总线通信概述 在江苏熔盛重工有限公司承建的超水