FT TEST SWITCH ElectroMeters（英国《金融时报》测试开关静电计）.pdf

FT TEST SWITCH FT TEST SWITCH AND TEST PLUG APPLICATION The ITI Type Test Switches and Test Plugs provide a safe, simple, fast and reliable method to isolate and service installed equipment. KEY Benefits The FT Switches and FT Test Plugs have all the features necessary for applications involving the measurement of individual currents and voltages to facilitate testing of substation instrumentation and protection devices from the front of the panel. The make-before-break current short circuit feature also allows test personnel to test quickly and safely. The FT Switch is built with a maximum of ten individual poles, or switch units. The switches can be assembled in a variety of different arrangements to match customer requirements. ITI FT Test plugs are used in conjunction with the FT Switches to enable easy measurement, calibration, verification or maintenance of relay, meters and instruments. Voltage measurements can also be made directly on the FT Switch without disturbing existing connections. There is a test clip provision located on the top of each pole that allows connection with stan- dard spring clip test leads. Protection With the cover in place, a meter type seal can be placed through either of the cover studs of the FT Switch to prevent unauthorized access to the switch. As an additional feature, a clear cover is available that can be installed and locked with the switchblades in the open or closed position. SPECIFICATIONS Rating The standard FT Switches is rated at 600 volts and 30 amps. The Switch meets or exceeds all requirements of ANSI/IEEE Standard C37.90. Mounting FT Switch are designed for semi-flush mounting on the front of switchboard panels, facilitating inspection and accessibility. Drilling Plan - Inches Net Shipping Weig