HYBRID ANALYSIS OF VIBRATION OF THE （混合振动的分析）.pdfVIP

TRANSPORT PROBLEMS 20 14 PROBLEMY TRANSPORTU Volume 9 Issue 2 analysis, hybrid, frequency, spectrum, dynamics, crane Tomasz HANISZEWSKI Silesian University of Technology, Faculty of Transport Krasińskiego 8, 40-019 Katowice, Poland Corresponding author. E-mail: tomasz.haniszewski@polsl.pl HYBRID ANALYSIS OF VIBRATION OF THE OVERHEAD TRAVELLING CRANE Summary. The article presents the results of numerical experiment using a hybrid approach of finite element method and system dynamics simulation of the overhead traveling crane in the case of lifting load. The aim of the analysis was to examine the impact of the load on the crane structure, while lifting the load and vibration measurements in selected areas of the structure. For this purpose were built and used FE model of the object and an example of the proposed phenomenological model of the hoisting mechanism of crane. The presented method is applicable when vibrations are becoming of interest in the desired location points on the structure, which allows to determine the dynamic properties of supporting structure of the crane at the stage of its construction, which in the end allows you to reduce the costs associated with research on the manufactured experimental objects. Depending on the degree of accuracy in representation of real object and the phenomenological and FE model, the calculation accuracy is obtained with a degree of more or less satisfactory, which is dependent on the