Hybrid NDE Method for Spot Weld Quality （混合濒死经历点焊质量的方法）.pdfVIP

-NDE USAMP/NDE 1002 - Hybrid NDE Method for Spot Weld Quality Evaluation PI: Leonid C. Lev General Motors Company LLC Presenter: Martin H. Jones Ford Motor Company 2012 DOE Vehicle Technologies Program Review May 16, 2012 Project ID # - LM051 This presentation does not contain any proprietary, confidential, or otherwise restricted information -NDE This material is based upon work supported by the Department of Energy National Energy Technology Laboratory under Award Numbers DE-FC26-02OR22910 and DE-EE0003583. This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise does not necessarily constitute or imply its endorsement, recommendation, or favoring by the United States Government or any agency thereof. The views and opinions of authors expressed herein do not necessarily state or reflect those of the United States Government or any agency thereof. USAMP NDE1002 -NDE