单片机控制TC35_c.docVIP

单片机控制TC35_c//AT指令的定义char code AT_Tc35[]=AT+;??? //连机 char code Bps_Tc35[]=IPR=38400; //波特率 char code Text_Tc35[]=CMGF=1;??? //文本模式 char code Read_Tc35[]=CMGR=; //读信息 char code Erase_Tc35[]=CMGD=; //删除信息 char code Send_Tc35[]=CMGS=; //发送信息 char code Creg_Tc35[]=CREG?;??? //注册 //模式设置 void UART_Init(void) { SCON=0x50;??? /=1模式scon,; ES=l; } //发送-个ASCII void SendASC(unsigned char ASC) { bit es; es=ES; ES=0;//关闭中断 TI=0; SBUF=ASC; while(!TI); TI=0; ES=es; ) //发送命令到TC35 void SendToTc35(unsigned char* p,unsigned char Long) { while(Long--) { ??? SendASC(*p++); } } // 通讯中断接收程序 void Rs485_Do(void) interrupt 4 using 1 { if(RI==l) { ??? RI=0; ??? RsBuq[RsPoint++]=SBUF; ??? if fRsPoint=sizeof(RsBuf)) ??? { ??? RsPoint=0;//FlagRs485=0; ??? } //数据处理 } } // 发送AT连机命令 char code AT_Code[]=OK; void Send_AT(void) { unsigned char *p; while(1) { ??? ClrRsBuf(RsBuf,sizeof(RsBuf)); ??? SendToTc35(AT_Tc35,2);??? //AT ??? SendASC(OVER); //************等待应答“ok ??? ES=1;??? //必须中断 ??? Delay(50); ??? P=strstr(RsBuf,AT_Code); ??? if(p!=NULL) break; } ) //发送bps连机命令 void Send_BPS(void) { SendToTc35(AT_Tc35,3);??? //AT+ SendToTc35(Bps_Tc35,sizeof(Bps_Tc35)-1);//IPR=19200 SendASC(OVER); } //设置文本 void SetText(void) { SendToTc35(AT_Tc35,3);??? //AT+ SendToTc35(Text_tc35,sizeof(Text_tc35)-1);//IPR=19200 SendASC(OVER); Delay(100)： //删除短信息 unsigned char EraseMsg(unsigned char index) { unsigned char *p,i=20; SendToTc35(AT_Tc35,3);??? //AT+ SendToTc35(Erase_Tc35,sizeof(Erase_Tc35)-1);//IPR=19200 SendASC(index); SendASC(OVER); ES=1; while(i--) { ??? Delay(200); ??? P=strstr(RsBuf,AT_Code); ??? if(P!=NULL)??? {return 1;} } return 0; } //读取短信息 char code Ask_No[]=+CMGR:0,,0; char code ERROR{]=ERROR; char code Ask_Tc35[]=/; unsigned char ReadMsg(unsigned char index) { unsigned char *p,i; unsigned char Buf[40]; SendToTc35(AT_Tc35,3);??? //AT+ SendToTc35(Read_Tc35,sizeof(Read_Tc35)-1); SendASC(index); SendASC(OVER); ES=1;??? //必须中断 Delay(600); /*------- ??? ES=0： ??? SendToTc35(RsBuf,99); ??? ES=