SCHOOL of ENGINEERINGand PHYSICAL （ENGINEERINGand物理学院）.pdf

CYCLONE TESTING STATION SCHOOL of ENGINEERING and PHYSICAL SCIENCES James Cook University REPORT NO. TS799 Revision A 21 March 2010 Concentrated Load Testing and Cyclic Strength Wind Load Testing of Everbright E610 Cladding By Ulrich Frye for Everbright Roofing Systems 8 Santa Monica Parade, Iluka, WA 6028 NATA Accredited Laboratory Number 14937 This document is issued in accordance with NATA’s accreditation requirements. Accredited for compliance with ISO/IEC 17025. Cyclone Testing Station Report No. TS799 Revision A Page 2 of 9 1 Introduction This Report No. TS799 Revision A is to replace the original document Report No. TS799. The aim of this test program was to perform concentrated load testing and cyclic strength simulated wind load testing of Everbright E610 roofing and walling system, manufactured by Everbright Roofing Systems. The test roof panels were loaded in accordance with the AS 4040.1 concentrated load and AS 4040.3 cyclic strength test regimes. The testing was performed with the use of new test materials, supplied by the client. The wind load tests were conducted in the airbox testing facility located in the Wind Tunnel Building and the concentrated load tests were conducted on the Structures Floor, both at James Cook University. The Cyclone Testing Station is a NATA accredited testing laboratory. All trials for this testing program were perfor