STANDARD OPERATING PROCEDURE AND （标准操作程序和）.pdfVIP

STANDARD OPERATING PROCEDURE AND SAFETY GUIDE FOR ROLLING MACHINE (Located in Rm. C-23 Head Hall) Prepared July13, 2010 Table of Contents 1. Scope4 1.1 Objective4 1.2 Regulations 4 2.Apparatus Overview and objective 4 2.1 Apparatus overview 4 3. Hazards and control evaluation12 3.1 Possible fire event 12 3.2 Ventilation12 3.3 Kinetic, thermal accoustic12 3.4 Electrical 13 3.5 General, physical equipment concerns 13 3.6 Access 14 3.7 Training 14 3.8 Personal protective equipment 14 4. Operation14 4.1 Qualified personnel 14 4.2 Experiment preparation15 4.3 Lab instructions 15 4.4 Operating procedure 15 5. Inspection and maintenance 17 5.1 Operational Periodic inspections 17 6. Typical test 17 ii C-23, Head Hall floor plan 3 1. Scope 1.1 Objective This standard operating procedure is intended to provide operating instructions and safety information for the Department of Mechanical Engineering’s rolling machine located in C-23, Head Hall. This document is intended as a guideline and supplement to proper training that must be provided by qualified personnel before the apparatus is operated. The aim of this document is to ensure that safe work practices have been developed for the apparatus experimental work. This SOP is primarily concerned with the apparatus operating procedure, the hazards involved with the apparatus use and safety precautions that must be taken to avoid injuries. 1.2 Regulations This document has been developed in accordance with the Environmental Health and Sa