Subsea Sealing Solutions and Riser Hangoff （水下密封解决方案和立管悬挂）.pdfVIP

Subsea Sealing Solutions and Riser Hang-off Equipment Subsea Sealing Solutions and Riser Hang-off Equipment With over 25 years industry experience, Subsea Innovation designs and manufactures an extensive range of standard and bespoke subsea sealing solutions to suit clients’ specific project requirements. All design work is performed in-house by our team of engineers using Autodesk Inventor. Subsea Innovation manufactures elastomeric seals to exacting standards of quality and precision. Sealing solutions can be provided for applications with operating temperatures between -40°C to +180°C using elastomeric seals. Higher temperatures can be accommodated using graphite seals. Subsea Innovation seals are also designed and tested to operate in pressures between 0 and 500 bar.g. Seal activation methods can vary from an active design which incorporates a self sealing principle (which requires no external activation force) to mechanical or hydraulic methods. Subsea Innovation supplies an extensive range of sealing options which can be fitted with ROV torque tool receptacles or alternatively ROV hot stabs and receptacles for hydraulic activation. Examples of typical sealing solutions are - • ROV activated j-tube seals • Passive j-tube seals • Diver installed j-tube seals • Waterstop seals • Topside riser hang-off equipment With in-house control of design, component manufacture and assembly, Subsea Innovation is able to tailor seals to individual project requirements or provides a specialist bespoke service for one-off designs. Riser Hang-off Equipment Passive J-Tube Seals The purpose of a riser hang-off system is to provide a The Tekseal® ROV passive j-tube seal provides a structural support between the riser or umbilical and the