TALAT Lecture 1101 COREMaterials（达拉讲座1101 COREMaterials）.pdfVIP

TALAT Lecture 5203 Anodizing of Aluminium 27 pages, 24 figures Advanced Level prepared by José L.Gazapo and J. Gea, INESPAL Laminación, Alicante Objectives: − to describe the process of anodic oxidation of aluminium, which is one of the most unique and commonly used surface treatment techniques for aluminium − to illustrate the weathering behaviour of anodized surfaces Prerequisites: − TALAT lectures 5101, 5102, 5103, 5104 Date of Issue: 1994  EAA - European Aluminium Association 5203 Anodizing of Aluminium Table of Contents 5203 Anodizing of Aluminium 2 5203.01 Importance, Objectives and Methods of Surface Treatments for Aluminium 3 The European Aluminium Consumption for Building Applications in 19903 The Aluminium Surface Treatment 3 Dimensional Effects of Anodizing, Plating and Painting 5 5203.02 The Anodizing Process 6 The Anodizing Cell6 Changes in Current and Voltage during Anodizing7 Anodic Coating Structure/Cell Dimensions8 Anodizing Solutions 10 Barrier Type Electrolytes 10 Porous type electrolytes 10 Change in Film Thickness during Anodizing 12 Influence of Type of Alloy on Film Weight (Figure 5203.02.08) 12 Influence of Electrolyte Temperature 13 Influence of Current Density14 Influence of Acid Concentration15 Colouring Anodized Aluminium 15 Dying 16 Self Colouring, Integral Colouring 16 Electrolytic Colouring 16 Sealing of Anodic Films 17 Properties of Anodic Film18 Operational Sequences for Anodizing 20 5203.03 Quality Control and Standards 21 Quality Control 21 Standards (Figures 5203.03.02 and 5203.03.03) 22 EWAA - EURAS Quality Label/ QU