焦化工艺流程（Coking process）.doc

焦化工艺流程（Coking process） Brief introduction of coking process 4.1 coal preparation workshop The task of the coal preparation system is to provide qualified raw coal for the coke oven. The range is from the beginning of the coal yard to coke coal seam has been tajia. Including raw materials coal blending, grinding and transportation operations. In the coal preparation system, the coal blending system is used for the coal blending with electronic automatic proportioning scale. The capacity of the coal preparation system is designed according to the production capacity of the tamping coke oven with an annual output of 1 million tons of coke. The capacity of the feeding system is 300t/h, and the capacity of the coal blending pulverizing system is 300 t/h, and the amount of clean coal for the coke oven is 145.15t/h. Brief description of the process: the coking coal is transported by car and unloaded manually. Coal with different coal turns on coal; coal loader, bulldozer or the raw coal into the coal by the corresponding period by reciprocating feeder (M80501A-F) will pit under the coal into the 1 belt conveyor (A80501), the 2 and 3 belt conveyor sent to the coal bunker coal unloading in the storage of coal bunker. Electronic automatic weighing coal bunker under various coal according to the proportion corresponding to match, the Deferrizater iron coal into the crushing workshop of PCFK1618 reversible hammer crusher for crushing, fine coal is to 3mm accounted for more than 90%, of which 1mm accounted for more than 50%, then the preparation of 4, 5 and preparation 6 belt conveyor belt conveyor and the reversible warehouse into the coal tower for coke oven use. See the process flow chart of the coal preparation. The system adopts the combination of PLC control and local operation Coke oven, coke quenching and ground dust removal station Coke oven coking workshop selected 2 x 72 hole type ZHJL4350D wide chamber, double flue, exhaust gas recirculation, jet and single heating t