跟踪路由_（_ route tracking）.docVIP

跟踪路由_（_ route tracking） Traceroute _ Baidu encyclopedia, Baidu home page | login news page Post Bar MP3 photo video library. Help set the home page, natural culture, geography, history, life, society, art, character, economy, science, sports, dream of Red Mansions, Champions League Tracking route Encyclopedia The trace route Tracert (trace routing) is the routing trace utility used to determine the path taken by the IP datagram access target. The Tracert command uses the IP lifetime (TTL) Field and ICMP error messages to determine routing from a host to other hosts on the network. Catalog Tracert working principle Tracert command Solving problems with tracert Tracert command line options Note 1, routing detection based on record routing options 2 、 routing detection based on UDP protocol 3, routing detection based on ICMP Echo Request 4, Dos command Tracert tracking routing detailed Other Tracert work principle Tracert command Solving problems with tracert Tracert command line options Note 1, routing detection based on record routing options 2 、 routing detection based on UDP protocol 3, routing detection based on ICMP Echo Request 4, Dos command Tracert tracking routing detailed Other expansion edits this section Tracert working principle Respond to packets via Internet control message protocol (ICMP) that sends different IP lifetime (TTL) values to the target, Tracert The diagnostic procedure determines the route taken to the destination. Each router on the path is requested to reduce the TTL on the packet by 1 at least until the packet is forwarded. The TTL on the packet is reduced to 0 The router should send the message ICMP has timed out back to the source system. The Tracert sends a response packet of TTL at 1 and increments the TTL at each subsequent sending process 1, the route is determined until the target response or TTL reaches its maximum value. Routing is determined by checking the message ICMP has timed out returned by an intermediate router. Some rou