重启电脑命令（Restart the computer command）.docVIP

重启电脑命令（Restart the computer command） Shutdown commands, notes, and application examples User rights must be granted to the user to shut down the system. The user can use the shutdown command to turn off local or remote managed computers. For more information, see Access Control Overview and privileges in related topics. The user must be a member of the Administrators group to annotate the unexpected shutdown of the local or remote managed computer. If the target computer joins the domain, members of the Domain Admins group can execute the process. If you wish to close multiple computers at once, you can use scripts to call shutdown for each computer, or you can use the shutdown /i to display the remote shutdown dialog box. Once you specify the primary and secondary cause codes, you must first define those cause codes for each computer that plans to use a specific cause. If the reason code is not defined on the target machine and the event is closed, the trace will not be able to record the correct reason text. Remember to use the p: parameter to indicate that the shutdown is scheduled to shutdown. Omitting p: indicates shutdown is unplanned shutdown. If you type p: after the reason for unplanned shutdown, the command does not perform shutdown. Conversely, if you omit p: and type the cause code for the scheduled shutdown, the command does not perform shutdown. Sample To force the shutdown, because the application: maintenance (plan), and the application that says reconfigure myapp.exe is turned off and restart the local computer after a 1 minute delay. Type in, please: Shutdown, /r, /t,, /c, Reconfiguring, myapp.exe, /f, /d, p:4:1 To restart the remote computer \\ServerName using the same parameter, type in: Shutdown, /r, /m, \\servername, /t,, /c, Reconfiguring, myapp.exe, /f, /d, p:4:1 XP below: Enter under CMD: at, 21:00 shutsown -s (turn off the computer at 9:00 in the evening) 2000 below: The XP system inside WINDOWS\system32\shutdown.exe copy to 2000 system WIN