难割难分（Is difficult to cut）.docVIP

难割难分（Is difficult to cut） Since Yee proposed the FDTD method, the study of the absorbing boundary condition, an important component of the FDTD method, has not stopped. At present, there are mainly 2 ways to construct the absorbing boundary conditions. One is to introduce absorbing material on the boundary, and then the electromagnetic wave is absorbed into the absorption material without reflection, such as PML. The method is complex in structure and large in memory demand, but it has better absorption effect at a large incidence angle. The other is the transmission boundary condition, such as Mur boundary condition, which is constructed from the exterior traveling wave equation. This kind of transmission boundary condition has the characteristics of simple structure, little memory requirement and no memory consumption. Here are some of the more widely used absorbing boundaries Please do not upload any documents relating to copyright infringement without authorization unless the document is created solely by you or you are authorized by the copyright owner The rights prompt page can help you determine whether your document infringes the legitimate rights and interests of others Click on the upload document, which means that you confirm that the document does not violate library agreements and rights tips and other Baidu library help terms If you have any problems uploading the document, please see the library help. This paper analyzed the reason of Mur absorbing boundary condition error, discusses the absorbing boundary conditions by using the scattering center method correction problem of Mur scattering problem in a two-dimensional line radiation and cylindrical conductor source for example were calculated and uncorrected with order and high order approximate Mur absorbing boundary condition the comparison shows that the method is effective, finally using the Poynting vector direction to correct the Mur absorbing boundary condition of thought. [author]: Institute