fst-009数控车床夹具的改进 improvement of fst-009 cnc lathe ifxture.pdfVIP

第 37 卷　第 3 期 哈　 　 尔　 　 滨　 　 轴　　 承 Vol.37 No.3 2 0 1 6 年 9 月 JOURNAL OF HARBIN BEARING Sep. 2 0 1 6 FST-009数控车床夹具的改进 1 2 1 徐金君 , 徐 珍 , 吕国新 （1.西北轴承有限公司,宁夏 银川 750021 ；2.宁夏地质工程学校,宁夏 银川 750021） 摘　要：FST-009数控车床夹具的设计存在一定的问题，依据设备说明书的转速加工Φ45~60mm之间滚子 时，因夹紧力不够，出现让刀、工件转动等现象；当降低转速加工Φ45~60mm之间滚子时，虽能满足要求， 但大大降低了生产效率，无法充分发挥该类设备的利用率。为了不降低转速同时又能够加工Φ45~60mm之间 的滚子，对夹具进行了改进，由三爪夹盘改为弹性夹盘，使设备的利用率提高了一倍，满足了生产需要。 关键词：数控车床；弹性夹具；夹紧力；夹持块；轴承滚子 TG519.1 B 1672-4852（2016）03-0024-02 中图分类号： 文献标识码： 文章编码： Improvement of FST-009 CNC lathe fixture 1 2 1 Xu Jinjun , Xu Zhen , Lv Guoxin ( 1. Northwest Bearing Co.,Ltd., Yinchuan 750021, China; 2. Ningxia Geological Engineering School, Yinchuan 750021 China ) , Abstract: FST - 009 CNC lathe fixture design had certain problems, when processing rollers between Φ45 to 60 mm according to equipment manuals rotational speed, due to insufficient clamping force , cutter back-off of tool and no clamping material appeared; when processing rollers between Φ45 to 60 mm at lower rotational speed, although the requirements can be met, but the production efficiency was reduced greatly, and unable to give full play to the equipment utilization rate. In order to not reduce the speed at the same time, also can processing the rollers between Φ 45 ~ 60 mm, the fixture was improved, three-jaw chuck was changed to elastic chuck to increase equipment utilization 1 time