定位格架与子通道压力损失预测模型研究 pressure loss prediction model study of mixing spacer grids and sub-channels.pdfVIP

５０５ Vol．５０ ，No．５ ２０１６５ Atomic Energy Scienceand Technology May ２０１６ １ １ １ １ １ ２ ， ， ， ， ， （１ ．， ５１８０２６ ；２ ．， ５１８０２８） ： 。 ，， ， 、、、、。 ，，， ，。 。 ：；；； ：TL３３ ：A ：１０００‐６９３１（２０１６）０５‐０８２３‐０６ ：１０ ．７５３８／ zk．２０１６ ．５０ ．０５ ．０８２３ y ‐ １ １ １ １ １ ２ ZHANG Yu‐xiang ，XI Yan‐ an ，PENG Ying ，LI Wei‐cai ，ZHOU Yue‐min ，ZHAO Huay （１ ． ， ５１８０２６ ， ； ２ ． ，．， ５１８０２８ ， ） ： Accurately predicting pressurelossof spacer gridsand sub‐channelsiscritical for fuel assembly spacer gridsandholding system designandfor developing criticalheat flux （CHF） correlation．Thepresent study distinguisheddifferent typesof sub‐channels in a typical mixing spacer grid， and focused on the investigation of the relationship between spacer grids pressureloss and the sub‐channels pressureloss．Different design featureswereconsidered，including springs，dimples，mixing vanes and guide tabs etc． Based on classic hydraulic resistance results， all design features were hydraulically equivalent to flat plate with an angle in a circular tube ． Models of predicting pressure lossof spacer grids and sub‐channels were established ． It is found that the prediction results agreewith theexperimental resultsvery well ． ： spacer grid；sub‐channel； ressureloss； rediction modelp p （CHF） ， 。 CHF ：２０１５‐０４‐２９ ；：２０１５‐０６‐１５ ：（１９８２— ），，，，， ８２４ ５０ ， 。 。 ：４ ， ，，