反应堆压力容器锻件和焊缝金属的热稳定性研究 thermal stability of reactor pressure vessel forgings and weld metal.pdfVIP
- 1、原创力文档(book118)网站文档一经付费(服务费),不意味着购买了该文档的版权,仅供个人/单位学习、研究之用,不得用于商业用途,未经授权,严禁复制、发行、汇编、翻译或者网络传播等,侵权必究。。
- 2、本站所有内容均由合作方或网友上传,本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺!文档内容仅供研究参考,付费前请自行鉴别。如您付费,意味着您自己接受本站规则且自行承担风险,本站不退款、不进行额外附加服务;查看《如何避免下载的几个坑》。如果您已付费下载过本站文档,您可以点击 这里二次下载。
- 3、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等,请点击“版权申诉”(推荐),也可以打举报电话:400-050-0827(电话支持时间:9:00-18:30)。
- 4、该文档为VIP文档,如果想要下载,成为VIP会员后,下载免费。
- 5、成为VIP后,下载本文档将扣除1次下载权益。下载后,不支持退款、换文档。如有疑问请联系我们。
- 6、成为VIP后,您将拥有八大权益,权益包括:VIP文档下载权益、阅读免打扰、文档格式转换、高级专利检索、专属身份标志、高级客服、多端互通、版权登记。
- 7、VIP文档为合作方或网友上传,每下载1次, 网站将根据用户上传文档的质量评分、类型等,对文档贡献者给予高额补贴、流量扶持。如果你也想贡献VIP文档。上传文档
查看更多
反应堆压力容器锻件和焊缝金属的热稳定性研究 thermal stability of reactor pressure vessel forgings and weld metal
第38卷第1期 上海金属 V01.38,No.1
6 2016年1月 SHANGHAIMETALS January,2016
反应堆压力容器锻件和焊缝金属的热稳定性研究
王华明王均安
(上海大学材料研究所,上海200072)
【摘要】 采用热时效的方法对反应堆压力容器锻件、焊缝金属的热稳定性进行了研究。
结果表明,第二相强化与固溶强化的共同作用使得锻件、焊缝金属的抗拉强度、屈服强度在时效
过程中均呈先上升后下降(在500h时达到峰值)的趋势。焊缝中的Mn.Si—AI一0夹杂物的析出
促进了针状铁素体的非均匀形核,焊缝金属的组织更细小,相对母材具有更高的热稳定性。
【关键词】 反应堆压力容器钢锻件焊缝热时效力学性能
THERMALSTABILITYOFREACTORPRESSUREVESSEL
FoRGDiGSANDWELDMETAL
Jun’all
WangHuamingWang
ofMaterials
(Institute University,Shanghai200072,China)
Shanghai
effectofthermalonmicrostructureandmechanical ofreactor
【Abstract】The aging properties
vesselsteelswasstudied.Tensileand ofboth andweldmetalrose
pressure yieldstrength forgings
andthendescendedwith the time.TheMn—Si—A1一Oinclusions the
firstly extendingaging promoted
nucleationofacicularferriteinweldmetal.Weldmetalexhibiteda thermal
heterogeneous higher
with
stabilitycomparedforgings.
Vessel
ReactorPressure
Words】 Metal,Thermal
【Key Steel,Forgings,WeldAging,
Mechanical
Property
环锻件进行焊缝连接得到的反应堆压力容器 在280—450oC长时间时效后的力学性能与时效
(RPV)作为核电站中不可更换的部件,服役期间前相比并未发生明显改变旧5’7J,另有试验提及焊
000
除了需要承受辐照、流体冲刷、高压和腐蚀外,还 缝金属在450oC时效20h后其韧一脆转变温
承受长时间的高温作用¨1。所以热稳定性是 度上升了78℃¨J。以往的研究结果表明,在热时
RPV的重要性能指标之一,国际上采用热时效的 效过程中力学性能的变化与Mn.Ni—M
您可能关注的文档
- 二氧化碳喷射器运行效率的实验研究 experimental investigation of r744 ejector efficiency.pdf
- 二氧化碳驱防气抽油泵研制及结构优化设计 development and optimal structure designing of anti-gas pump in co2 flooding.pdf
- 二氧化钛薄膜制备技术及其光催化性能的应用 the preparation techniques of tio2 thin films and its application of photocatalytic activity.pdf
- 二氧化碳地质封存研究进展综述.pdf
- 二氧化碳和甲醇氢等离子体催化反应合成碳酸二甲酯 hydrogen plasma catalytic synthesis of dimethyl carbonate from carbon dioxide and methanol.pdf
- 二氧化碳热泵热水器系统运行特性.pdf
- 二氧化碳驱油藏产出气回注的可行性及其对驱油效果的影响 feasibility of produced gas reinjection during co2 flooding and its influence on displacement efficiency.pdf
- 二氧化碳驱最小混相压力动态预测方法 dynamic predicting method of the minimum miscibility pressure for co2 flooding.pdf
- 二氧化碳驱油分层注入技术研究 research on co2 layered inj ection technology.pdf
- 二氧化碳甲烷自热重整计算分析与中试 calculation analysis and pilot test of co2-ch4 autothermal reforming.pdf
- 反旋流对密封静力与动力特性影响的理论与试验研究 theoretical and experimental research on the performance of anti-swirl flow for the static and dynamic characteristics of seals.pdf
- 反应等离子喷涂tin复相涂层的组织与性能研究 research on microstructure and properties of reactive plasma spraying tin composite coatings.pdf
- 反应堆冷却剂主泵泵壳螺栓磁粉检测工艺 magnetic particle inspection technology of primary pump casing stud of reactor coolant.pdf
- 反向扩孔气动冲击器长距扩孔性能研究 the performance study of back-reaming pneumatic impactor while long reaming.pdf
- 反应堆应急行动水平的历史和新发展 the history and new development of emergency action levels of nuclear reactors.pdf
- 反应堆压力容器法兰面沟槽尺寸参数对其金属 o形环密封性能的影响 effect of groove dimension parameter of flange face on sealing performance of metal o-ring for reactor pressure vessel.pdf
- 反向扩孔气动冲击器结构对其性能影响的仿真研究 research on computer simulation for structure of reverse counterboring pneumatic impactor having an effect on its performance.pdf
- 反应挤出制备聚丙烯基三元共混物 polypropylene matrix ternary blends prepared by reactive extruding.pdf
- 反应挤出法分离废弃电路板中焊锡的研究 separation of tin from waste printed circuit board by reactive extrusion method.pdf
- 反应进料泵的配管设计.pdf
文档评论(0)