高紫外光阻隔高耐久光学胶使用之光安定剂-材料世界网.pdfVIP

308 2012/08 Light Stabilizers for High UV Cut-off and Durable Optical Adhesive Miles Hsieh M. H. Yen Y. S. Hwang Johnson Chen ()(Everlight Chemical Industrial Corporation) Eversorb® 2.4% 365 nm 0.5% QUV-340 nm1,000 365 nm 1.5% Optical Pressure Sensitive Adhesive not only require high transparency and high adhesion but also need great UV cut-off ability to prevent polymer materials being damaged by UV light from external sunlight or internal light source. In this article, we discussed how to choose the suitable Eversorb® light stabilizer in order to achieve high UV cut-off as well as high durability. In addition, how to properly get representative data if the measurements give results that are widespread. The research showed that after adding 2.4% light stabilizers, the degree of UV penetration at 365 nm of the sample was less than 0.5%. At the same time, there was no significant impact on the adhesion to glass. Furthermore, the degree of penetration at 365nm was still less than 1.5% even after 1,000 hours of QUV-340 nm accelerated aging test. /Key Words (Optical PSA) (UV Absorber) (Light Stabilizer) QUV (QUV Accelerated Aging Test) (Penetration) (Acrylic) (Silicone) (Pressure Sensitive Adhesive; PSA) .tw 139 308 2012/08