3d灯光教程（3D lighting tutorial）.docVIP

3d灯光教程（3D lighting tutorial） 3D lighting tutorial The use of lighting Before the light was not created, there is a default light to the effective performance of the scene. But it is not suitable for the final set of lights Animation, especially when the scene becomes complicated when it becomes incapable of action. The scene requires the user to deliberately artificial processing, In order to make the light fully showing 3D object shape, color, texture and texture. Light is an object, like other forms are created, modify, delete and adjust. It cannot itself be colored significantly Shows, but it can affect the surrounding surface gloss, color and brightness, so that the other body is more realistic. Light type Target Spotlights (spot) is a projected light. It can influence the laser beam within the object, property Have the shadow and special effects. Free Spotlight (free Spotlight): is a spotlight without goals. Mainly used for lighting in the animation way, Or as a seed object connected to another object. Target DirectionalLight (target directional light) is a projection of a directional light. For parallel to illuminate the object The shadow. Free DirectionalLight (Ding Xiangguang) is a kind of a parallel beam of light, the sun is used to simulate this self Natural light. Omni (light) is a kind of uniform irradiation point source in all directions. It will not produce projection, objects will not be Shielding. Floodlight The floodlight is one of the most common types of lights, but also the system lighting system set up (two floodlights, them one after. In the view and provide the necessary lighting to create other body). Once in the view to create any light set itself, the two floodlights will automatically shut down, only through the newly created lamp Light to illuminate the other body. The shadow floodlight is not generated by default, which rendered the time required is very short, the effect is not very good. Create 1. floodlights In the creation of the lig