spam150c和pa140（Spam150c and pa140）.docVIP

spam150c和pa140（Spam150c and pa140） Spam150 is mainly divided into 4 modules: the U1 module SPCJ4D34 motor protection. U2 power supply and output relay module SPTU240R2 or SPTU48R2 (with normally open contact, SPTU240R3 or SPTU48R3 trip) (with a normally closed contact trip). U3 input module SPTE4E3, a current transformer input. SPA-ZC bus connection module. SERIAL PORT serial communication port. RX, TX bus connection module receives the bus terminal and send to RX bus terminal TX. STALL refers to the external stall control input. RESTART INHIBIT refers to the external control signal and then start the ban. LATCHING refers to a tripping relay locking function. 10, the 11 is CONTROL INPUT. 61, 62 Uaux auxiliary voltage. 70, 71, 72 F relay, IRF self-test. 74, 75 is the E relay, TS1, RESTART ENABLE refers to the fault when the motor start is prohibited. 77, 78 is the D relay, SS1, START PRIOR ALARM, START from the motor startup information, PRIOR ALARM refers to the alarm start load. 80, 81 is the C relay, SS2, PRIOR ALARM SIGNAL2 refers to the alarm overload when the trip signal to 2. 68, 69 is B SS3, a relay, a trip signal 1. 65, is the 66 relay A, TS2, TRIP, a trip relay output. The SPAM150:1,2,3.4,5,6.7,8,9. is a current input terminal, 1, 3. 4, 6. 7, 9 for the 1A input. 1, 2. 4, 5. 7, 8. For the 5A input. 25, 26, 27. For zero sequence current I0 input, 25,26 input, 5A, 25, 27 for the 1A input. The control input 10-11 can be used in 5 different ways: as input control motor speed control switch in EX applications, as the control input locking unbalance protection or ground fault protection external blocking signal action, as the control input of external trip signal, as the control input for the lifting of tripping relay self maintaining, as restart open relay control input. 61, 62, 63 for the relay auxiliary voltage terminal, 61 positive power, 63 ground. 65, 66 output relay trip contact, contact with different rated values, depending on whether the normally open co