Zemax 2003 中高斯光束计算步骤.pdfVIP

Zemax 2003 中步骤： Anaylsis-calculations-gaussian beam 中计算高斯光束传输（快捷键 ctrl +B ） Gaussian beam data-setting 中初始高斯光束 参数设置： M2：光束的模式，为大于1 的整数，1 为单基模，大于1 为多模。 Surf 1 to Waist：1 面距离束腰的距离，因此一般做法是在物面和光学组前插一个1 面，将 束腰“放在”1 面上。 Divergence：远场发散角。 Radius：光波的半径，束腰处无穷大。 Rayleigh：瑞利长度，这三个随便一本激光原理的书里都有。 目前我的一个认识：高斯光束计算在zemax 2003 中可以也只能计算束腰尺寸，位置，远场发散角等，欢 迎大家相互交流。Email: boooq@yahoo.cn by hust—booq 2008-1-26 PS：没有时间翻译，在这里把Zemax 里所有有关资料汇总一下，给出一个简单案例。 -=-=-=-=-=--=-=-=-=-=--=-=-=-=-=--=-=-=-=-=--=-=-=-=-=--=-=-=-=-=- 高斯光束Zemax 介绍 Computes Gaussian beam parameters. Wavelength: The wavelength number to use for the calculation. M2 Factor: The M2 quality factor used to simulate mixed mode beams. See the Discussion. Waist Size: The radial size of the embedded (perfect TEM00 mode) beam waist in object space in lens units. Surf 1 to Waist: The distance from surface 1 (NOT the object surface) to the beam waist location. This parameter will be negative if the waist lies to the left of surface 1. Update, Orient, Surface: See below. Discussion: This feature computes ideal and aberrated Gaussian beam data, such as beam size, beam divergence, and waist locations, as a given input beam propagates through the lens system. This discussion is not meant to be a complete tutorial on laser beam propagation theory. For more information on Gaussian beam propagation, see one of the following references: Lasers, A. E. Siegman, University Science Books (1986), Gaussian beam ray-equivalent modeling and optical design, R. Herloski, S. Marshall, and R. Antos, Applied Optics Vol. 22, No. 8 pp. 1168 (1983), Beam characterization and measurement of propagation attributes, M. W. Sasnett and T. F. Johnson, Jr., Proc. SPIE Vol. 1414, pp 21 (1991), and New developments in laser resonators, A. E. Siegman, Proc. SPIE Vol. 1224, pp 2 (1990). A Gaussian laser beam is described by a beam waist size, a wavelength, and a location in object space. The Gaussian beam is an idealization that c