含体积型缺陷管道的缺陷尺寸确定及子截面划分软件实现算法_吉华.pdfVIP

41 6 四川大 学 学 报 ( 工程 科 学版 ) V o.l 41 No. 6 2009 11 JOURNAL OF SICHUAN UNIVERSITY ( ENGINEER ING SCIENCE ED ITION ) Nov. 2009 : 1009 3087( 2009) 06 0193 07 吉 华, 马 江, 曹廷发 ( , 610065) : SY /T 6477 2000/API 579, , (CTP), ; , ( RSF), , : ; ; ; : TE88 : A SoftwareAlgorithms for theDetermination ofMetalLossDimensions and SubsectionsGeneration in the PipelineAssessmentwithVolumetricTypeFlaw JIH ua, MA Jiang, CAO Ting-f a ( School ofChem. Eng. , Sichuan Univ. , Chengdu 610065, China) Abstract:Designing software algorithms for critical steps, which can not be mi plem ented by sofwt are according to standards directly, is an mi portant and difficult task because those stepsneed the intervention and experience of en gineers. Software algorithms for two critical steps in SY /T 6477 2000/API 579, the metal loss dmi ension determ i nation and the subsections generation, were proposed. Themetal lossdmi ension determ ination can not be mi plemen ted directly because of its dependence on graph. To solve this problem, Critical Thickness Profiles ( CTP) graph was constructed using linear interpolation, and then the software algorithm for dmi ension determ ination ofm etal loss was designed based on the CTP graph. The subsections generation can not be mi plemented directly because of its dependence on the experience of engineers. To handle this problem, the cyclical iteration which used the change rate of Remaining Strength Factor ( RSF) as the term ination condition, was designed. U tilizing the cyclical itera tion, the software algorithm for subsections generation was designed. The validity of the algorithm was proved. Th