仪器维护（Instrument maintenance）.docVIP

仪器维护（Instrument maintenance） 1. introduction and working principle of the instrument 1.1 instrument profiles Modular P biochemical analysis system is a modular concept of Germany Roche Diagnostics company in 2003 to launch the China combination of biochemical analysis system, it can analyze the biochemical indexes in serum, plasma and urine in the body. The system consists of the core unit including intelligent process management system, biochemical analysis module, electrolyte and pre processing module which can be added according to actual needs. The main parameters of the system are as follows: Clinical laboratory 1.1.1 performance features: 1) a continuous, multichannel, vertical analysis system 2) optional input menu, each specimen can detect 1-47 items at the same time 3) analysis speed: 1700 tests per hour (including ISE 900 test / hour) 4) sample processing capacity: an average of 300 specimens per hour 5) detection methods: colorimetric method (end point method, rate method), transmission Turbidimetry 6) suction volume: 2-35 rise per test 7) minimum reagent consumption: 150 9) reaction environment temperature: 37 degrees circulating water bath, the temperature allows error: 0.1 degrees Clinical laboratory 1.1.2 injection system Clinical laboratory 1) sample rack: each shelf can hold 5 samples 2) sample identification: frame number and location, or through bar code identification 3) sample shelf type: according to the shelf color difference is divided into: routine, emergency, calibration, quality control, repeat four shelves 4) sample cup: 2 ml cup or 1.5mL micro cup, or primitive blood vessel C 1.1.3 reagent distribution system C 1) reagent plate: 2 reagent trays, that is, the first reagent plate and the second reagent plate. The temperature of each reagent plate must be controlled at 5-15 degrees 2) reagent batch bottles: 290, 130, 70, 20 ml, 4 kinds 3) reagent dosage: 1 reagents or 2 reagents, plus 20-270 increments each time C 1.1.4 detection system C