修复引导区常用软件（Repair boot area common software）.doc

修复引导区常用软件（Repair boot area common software） Then use the binary editing tools in other normal machines (recommended UltraEdit) to modify the IO.SYS file on the floppy disk (remember the first before the revision of the attributes of the file is changed to normal), is the first specific search string 55AA in this file, found after modification for any other values. Floppy disk system with this modified you can smoothly be lock the hard drive. But then because of the normal hard disk partition table has been destroyed, you cannot delete and modify the partition with Fdisk, but it can be used in front of introduced on the restoration method of table partition to handle. * * DM Because DM is not dependent on the motherboard BIOS to identify the hard disk tool, even in the hard disk motherboard BIOS will be set to NONE, DM can identify the hard disk and partition and format operation, so we can also use the DM software to unlock the hard disk. The DM copy to a system disk, then locked after the hard disk boot, press Del button to enter the BIOS settings, all IDE interface is set to NONE and save the exit, and then use the floppy disk system, system can be locked to start, because this system is not hard at all. Run the DM after the start, you will find that DM can identify the hard disk, select the hard disk partition format can be. This method is simple and convenient, but there is a fatal shortcoming, that is the hard disk data lose ^ - ^. The partition table is damaged Partition table error is one of the most serious error of hard disk partition table data, the damage will cause the confusion of the division or loss, the general can not be manually restored, the only way is to write the partition data backup table back, or from other types of the same condition and hard disk partition on the same partition table data acquisition otherwise, will cause permanent loss of other data, however, these tools will help us to reduce losses to a minimum. * * KV3000 In the KV3000