吸塑灯箱（Suction lamp box）.docVIP

吸塑灯箱（Suction lamp box） abstract Plastic lamp box classification: Plastic lamp box can be divided into wall hanging type, site type, rotary type, combination type, opposite type, etc.. Plastic suction lamp box, plastic lamp box, three-dimensional luminous word processing technology Plastic boxes of solid light processing technology - acrylic due to stable quality, so the product has the characteristics of good transparency clearhyperopia effect, high compressive strength, ten years do not fade, bright light boxes, and other metal words can be compared, sustainability and strength of strong businesses preferred share. From multinational corporations, McDonalds, KFC and pizza hut, to the domestic supermarket chains, banks, commercial vehicle service center shop, all pregnant with advertising products logo of a huge business opportunity. Acrylic processing is inseparable from the mold. Moulds can be made of wood, gypsum, steel, etc. depending on the number of processing batches, the material selection shall be decided. Wood cost savings, only for a small amount of processing, because for a long time will dehydrate deformation, refined natural appearance, but also to the post production trouble (processing). Plastic suction lamp box and three-dimensional light-emitting words of the same pre production: making film - heating (about 160 degrees) - automatic suction vacuum - cooling (40 degrees) - off film - trimming - add slot - three-dimensional luminous word. (trimming, bonding, connecting with the panel, block, mosaic, plastic suction lamp box). The mould can be made of woodworking curve saw or computer engraving, and the protruding die should have a slope, and the upper and lower stools can be removed. Heating temperature is appropriate, not the higher the temperature, the higher the temperature, the acrylic plate will crack, lose its flexibility, the suction depth will not be ideal. Automatic vacuum suction system, intelligent temperature control system is the core co