英文文献翻译-增益规划的模糊温度控制器的单向输入系统Gain-scheduling fuzzy temperature controller or one-way input system.docVIP

河南理工大学本科毕业设计 （英文文献翻译） 英文题目：Gain-scheduling fuzzy temperature controller or one-way input system 译文题目：增益规划的模糊温度控制器的单向输入系统 学 院：电气工程与自动化学院 专业名称： 自 动 化 年级班级： 08-6 班 学生姓名： 苗 壮 指导教师： 钱 伟 2012年 6 月6日  Gain-scheduling fuzzy temperature controller for one-way input system Shiuh-Jer Huang1,2 and Chen-Chuan Wang2 1Department of Vehicle Engineering, National Taipei University of Technology, No. 1, Sec. 3, Chung-Hsiao East Road, Taipei, Taiwan 106 2Department of Mechanical Engineering, National Taiwan University of Science and Technology, No. 43, Keelung Road, Sec. 4, Taipei, Taiwan 106 In many chemical and semiconductor manufacturing processes, temperature is an important control parameter for obtaining the desired product quality. Generally, the temperature control system has non-linear time-varying, slow response, time-delay and one-way control input characteristics. It is difficult to estimate accurately the dynamic model and design a general-purpose temperature controller to achieve good control performance. Here a model-free intelligent gain-scheduling fuzzy control strategy is proposed to design a temperature controller for an iron closed chamber with heater input only. The concept of gain scheduling is employed to adjust the mapping ranges of fuzzy membership functions during the control process for improving the control performance. The experimental results show that the steady-state errors of the step input responses are always less than 0.28C without overshoot by using this control scheme. It is suitable for industrial temperature control systems. Key words: fuzzy control; gain scheduling; temperature control and one-way input. 1. Introduction Temperature is an important control parameter in chemical, material and semiconductor manufacturing processes. For example, material annealing, thin film deposition and